Dental Restoratives: Composites, Matrices and Wedges, Resin Cements & more

BioClear Evolve Matrices Mini Kit - Anatomically Pre-shaped Posterior matrices are in three widths

Evolve matrices are an evolution in posterior matrices - an improvement on what was already the most advanced and user-friendly mylar matrix in modern posterior restorations, the BioClear Biofit HD, and the Evolve Matrices Mini Kit have the same benefits and additional features for posterior cases.

The new features of the BioClear Evolve Matrix Mini Kit Series include:

·       Three emergence profile shapes that are color-coded on the

·       Matrix heights printed on the matrix for quick identification

·       Extra-flared quick-release tabs on the buccal and lingual surfaces that are easier to find and use

·       Wide array of sizes (heights) available (the blue comes in 5, 6, 7, and 9mm’s, the orange comes in 6mm’s, and the pink comes in 6, 7mm’s)

Blue Evolve:

The Blue Evolve Matrix is colour-coded to be easily seen, features an aggressively rounded emergence profile, and comes in four heights to provide an ideal fit.
The occlusal curvature of the matrix creates a rounded marginal ridge with ease. The size and shape are appropriate for most posterior molar cases.
The Blue Evolve's shape is the most curvaceous of our posterior matrices and requires a unique insertion method.
To place the matrix, rotate it into place from top to bottom. Doing this expands the matrix base so it snaps over the tooth and into place.

Orange Evolve:

This matrix features a flatter emergence profile curvature than the Blue Evolve but is not as flat as the Pink Evolve matrix. The Orange Evolve Matrix is colour-coded to be easily seen, features a flatter emergence profile curvature, and comes in three heights to provide an ideal fit.
Orange Evolve was created for instances where the Blue Evolve Matrix or Biofit HD Matrix would invert.

This commonly occurs between maxillary 1st and 2nd molars.

Used For:
•Teeth with root proximity
•Flat teeth

The root proximity often causes a normal sectional matrix to invert occluso-gingivally and buccal-lingualy.
Orange Evolve’s shape is a middle ground between the blue, which is very curvaceous, and pink, which is our flattest posterior matrix.

Pink Evolve:

Commonly used between maxillary 1st and 2nd molars in cases of broad teeth, tight root proximity, or very flat teeth. Often referred to as the Broad Flat Molar Matrix. The Pink Evolve Matrix is colour-coded to be easily seen, features a broad emergence profile curvature, and comes in three heights to provide an ideal fit.

Pink Evolve was created for instances where the Blue Evolve Matrix, Biofit HD Matrix, or Orange Evolve Matrix would invert. This commonly occurs between maxillary 1st and 2nd molars.

Used For:
•Very Broad teeth
•Teeth with extreme root proximity
•Very flat teeth

The interproximal of the 1st and 2nd maxillary molars is often much wider buccal-lingually than any other embrasure areas. This can cause a traditional sectional matrix to invert buccal-lingually. The root proximity often causes a normal sectional matrix to invert occluso-gingivally and buccal-lingualy.

Pink Evolve’s shape is our flattest posterior matrix.

Product Description-

Revolutionary ionglass^TM Technology

Riva Cem Automix features SDI’s revolutionary ionglass^TM technology. This unique blend of different sized reactive glass particles harnesses ion-release to cross-link polycarboxylic acid chains. This focused ion release gives Riva Cem Automix a clinically higher strength, superior bond and more stable aesthetic properties. 

It is a self-curing, radiopaque, fluoride releasing paste/paste resin modified glass-ionomer luting cement. It is indicated for the permanent cementation of metal and ceramic restorations. The automix tip attachment offers convenience over traditional hand mixing.

SUPERIOR BOND STRENGTH 
Reliable adhesion to tooth structure is important for long term retention of cement restorations. Riva Cem Automix shows excellent bond strength to enamel and dentine in an external study conducted over a 6- month period. 

HIGHEST FLEXURAL STRENGTH 
A high flexural strength enhances the longevity of a cement restoration by better withstanding mastication forces. Also increases its durability in the oral environment.

LESS CEMENT WASTE
Riva Cem Automix offers more tips than any other leading cement. Each supplied tip has less waste than other cements, providing you with more material for more patients.

EASY REMOVAL OF EXCESS CEMENT
Riva Cem Automix has a light tack cure option for easy removal of excess cement. Simply light tack cure any excess material for 5 seconds with an LED curing light. Then gently remove excess material. Alternatively, excess material can be removed after the self-curing phase (1 min 30 seconds).

BEST LONG-TERM AESTHETICS 
Colour changes within luting materials can clinically affect the aesthetic appearance of a prosthesis. It is important to choose a dental cement which has the least colour change over time. External tests have confirmed that after 6 months of water storage, it has the best-in-class colour stability.

Advantages
1) Superior Bond Strength
2) Light tack cure for easy removal of excess cement
3) Sustained Fluoride release
4) High Flexural Strength
5) Less Waste in Mixing tips
6) Long term Aesthetics
7) BPA free
8) Shade: Light Yellow

Black Triangle (BT) Procedural Kit

Bioclear is pleased to introduce the Black Triangle System, a new matrix system that enables black triangle closure up to 40% faster* than with the original Bioclear matrices.

Black Triangle matrices are custom-designed for black triangle treatment and require no trimming before seating.

A colour-coded gauge and matrices make choosing the correct curvature for gingival embrasure closure simple and predictable. Curvature is indicated by colours at the top of the matrix and corresponds with a gauge that, when inserted into the black triangle, indicates which curvature to use.

The matrices come in two sizes (large incisor and small incisor) and four curvatures allowing you to treat the entire anterior sextant, canine to canine and both upper and lower arches with strong aesthetically pleasing results.

Black triangle Matrices

Using paired matrices, curvature (indicated by colour) closes spaces up to:

Pink – 1 mm space
Yellow – 1.5 mm space
Green – 2 mm space
Blue – 2.5 mm space

1.        Small Incisor BT Matrix Tub: For mandibular incisors and small maxillary lateral incisors

2.        Large Incisor BT Matrix Tub: These are taller and wrap the tooth more than the Small Incisor BT Matrices. They should be used for maxillary central Incisors, large maxillary lateral incisors, maxillary and mandibular canines, and maxillary and mandibular bicuspids.

Black Triangle Gauge

The BT Gauge is for use with the new colour-coded BT Matrices. The use of the gauge with these colour-coded matrices is designed to make black triangle closures simpler and more efficient.

Cleaning & Sterilization

1. BT Gauges and TrueContact Saws and Sanders are reusable and autoclavable. Wash with soap and water using a soft brush to remove debris
Note: Do NOT use sprays/wipes, this could damage the BT Gauge.

2. Sterilize using steam sterilizers only on the regular cycle
Note: The temperature of the sterilizer should NOT exceed 270° F/132° C

Bioclear Anterior Matrices Mini Kit-Modern matrix system for esthetic restorations

The Bioclear Matrix’s anatomic shape allows for predictable restoration or change of a tooth’s emergence profile. If there is a good contact, the matrix is easily used wedge-free. When placed into the sulcus, the matrix is stabilized and marginally sealed by the papilla. If there is not a contact, then a staged wedging (or delayed wedging) technique will need to be used.

Bioclear’s anatomically shaped matrices allow for injection/placement of composite into the embrasure without fear of leaving an overhanging margin. The Bioclear Matrix leaves the interproximal composite smooth and properly contoured

Getting started

Bioclear Matrix is the only completely clear anatomic sectional matrix on the market. It, along with the other Bioclear products, will produce the smoothest embrasures and strongest contacts compared to other matrix systems. The high-quality restorations created with the Bioclear Matrix are raising the bar for anterior composites.
Please thoroughly read the instructions and product care guide before use.

Diastema Closure

The Diastema Closure matrices are for creating new and exaggerated emergence profiles, closing diastema larger than 1mm and for large black triangles. The Diastema Closure matrices have more curvature than the Anterior matrices. Combining papilla regeneration with space closure is the key to optimal diastema closure.

Anterior matrices

BioClear Anterior matrices allow for a modern approach to composite dentistry. They have less curvature than the Diastema Closure matrices and are used for everyday restorative dentistry as well as in aesthetic treatments where small spaces need to be filled.

Biofit HD Posterior Mini Kit-Matrix system for posterior Class II restorations

The Biofit HD Posterior Mini Kit contains a range of Biofit HD Matrices Molar 4.5mm, 5.5mm and 6.5mm (appropriate for 75% of posterior molar cases) pre molar 5.5mm and also includes Diamond Wedges (which have strong separation yet require less effort to place than traditional wedges)

Biofit HD Series

The HD series Bioclear Biofit matrices introduce new matrix technology and designs that ensure ideal tooth contours and a heavier material that ensures easier placement

The HD series Bioclear Biofit matrices introduce new matrix technology and designs that ensure ideal tooth contours. Formed with translucent white 75µ mylar, the stiffer mylar and placement tab provide a rigid structure that makes the matrix easy to place.

The translucence of the mylar allows ample light to pass through for thorough light curing. Mylar matrices also leave the composite more polished and contoured than traditional metal matrices which leave a more matte finish.

In addition, the new shape of the Biofit matrices offers 30% more buccal/lingual and occlusal wrap than traditional matrices and will be appropriate for 75% of all posterior molar cases.

The new Biofit HD matrices come in four sizes; Molar 4.5 mm, 5.5 mm, 6.5 mm, and Pre-Molar 5.5 mm

Diamond Wedges and Long Diamond Wedges

The Bioclear Diamond Wedge is designed to solve many of the difficulties in using traditional, rigid wedges.

The Diamond Wedge requires less effort to place than traditional wedges due to the diamond-shaped cut-out in the tip, which collapses during insertion. The wedge then springs open once through the embrasure, creating a tight seal and preventing the wedge from backing out.

While still maintaining strong tooth separation, the flexibility of the Diamond Wedge creates an excellent marginal adaptation that eliminates the uncontrolled flow of excess composite and minimizes clean-up after the composite has been cured.

The Diamond Wedge is offered in both original and long. The Original Diamond Wedge is intended for most cases. The Long Diamond Wedge is approximately 2mm longer than the original wedge and is intended to be used when working on wider molars. Typically long wedges are used in conjunction with the Pink or Orange Evolve matrices

Clinical Tips

1. Used with a rubber dam

2. Choose the correct matrix – Use a Bioclear clear matrix for simultaneous buccal & lingual curing

3. Use Bioclear Forceps, as designed specifically for the Twin Ring

4. Check for proper matrix orientation

5. Seat deep into sulcus Use the MATRIX SELECTION GUIDE on the back of the instructions to help select the appropriate matrix.

6. Use Bioclear Forceps with the Twin Ring. The Bioclear Forceps are specifically designed for safely and securely opening and placing the Twin Ring.

7. Ensure that the tines of the forceps are completely engaged with the plastic handles of the Twin Ring (see below). If they are not fully engaged or if the tines are seated on the metal, then it can cause the Twin Ring to break.

Bioclear Rockstar Polishing kit- Phenomenal shine & finish of composite restorations

Bioclear’s two-step Rockstar Polish is designed to give your composite restorations a phenomenal finish and shine and is one of the four cornerstones of the Bioclear Method.

 The first step of the Rock Star Polish, the Magic mix pre-polisher, marginates to the infinity edge and creates the perfect matte finish while the second step of the Rock Star Polish, the RS Polishers, leaves a mirror like final finish to the restoration.

Magic Mix Pre-polish Paste and Magic Mix Pre-Polish Cups are single-use only.
RS Polisher Cups are reusable and autoclavable.

ROCKSTAR SYSTEM

Each component of the system is designed to have 2 phases
• Magic Mix Pre polishing paste – contains both large and small particles
• RS Polisher[The diamond grit rubber cup]– first use without water utilizing friction heat :Dry Polishing then use it water:Wet polishing

Black Triangle (BT) Kit

Bioclear is pleased to introduce the Black Triangle System, a new matrix system that enables black triangle closure up to 40% faster* than with the original Bioclear matrices.

Black Triangle matrices are custom designed for black triangle treatment and require no trimming prior to seating.

A color-coded gauge and matrices makes choosing the correct curvature for gingival embrasure closure simple and predictable. Curvature is indicated by colors at the top of the matrix and correspond with a gauge that, when inserted into the black triangle, indicates which curvature to use.

The matrices come in two sizes (large incisor and small incisor) and four curvatures allowing you to treat the entire anterior sextant, canine to canine and both upper and lower arches with strong aesthetically pleasing results.

Black triangle Matrices

Using paired matrices, curvature (indicated by color) closes spaces up to:

Pink – 1 mm space
Yellow – 1.5 mm space
Green – 2 mm space
Blue – 2.5 mm space

1. Small Incisor BT Matrix Tub: For mandibular incisors and small maxillary lateral incisors
2. Large Incisor BT Matrix Tub: Are taller and wrap the tooth more than the Small Incisor BT Matrices. They should be used for maxillary central Incisors, large maxillary lateral incisors, maxillary and mandibular canines, and maxillary and mandibular bicuspids.

Black Triangle Gauge

The BT Gauge is for use with the new color-coded BT Matrices. The use of the gauge with these color-coded matrices is designed to make black triangle closures simpler and more efficient.

TruContact Saws and Sanders

Contact optimization is an essential part of the Bioclear Method. Natural contacts are generally too tight and too rough to allow insertion of a mylar matrix. Bioclear TruContact Saws and Sanders are designed to work in sequence to lighten the contact which then improves the ease of placement of the mylar matrices. As an additional advantage, the TruContact also removes biofilm from the contact

Dual Color Disclosing Solution

Disclosing solution for discovery of cracks and biofilm for blasting. Newer Biofilm stains pink. Older biofilm & cracks (more than 24 hours) stain purple, aiding the clinician in properly educating patients about oral hygiene & restorative needs.

Cleaning & Sterilization

1. BT Gauges and TrueContact Saws and Sanders are reusable and autoclavable. Wash with soap and water using a soft brush to remove debris
   Note: Do NOT use sprays/wipes, this could damage the BT Gauge.
   2. Sterilize using steam sterilizers only on the regular cycle
   Note: Temperature of sterilizer should NOT exceed 270° F/132° C

Black Triangle (BT) Kit

Bioclear is pleased to introduce the Black Triangle System, a new matrix system that enables black triangle closure up to 40% faster* than with the original Bioclear matrices.

Black Triangle matrices are custom designed for black triangle treatment and require no trimming prior to seating.

A color-coded gauge and matrices makes choosing the correct curvature for gingival embrasure closure simple and predictable. Curvature is indicated by colors at the top of the matrix and correspond with a gauge that, when inserted into the black triangle, indicates which curvature to use.

The matrices come in two sizes (large incisor and small incisor) and four curvatures allowing you to treat the entire anterior sextant, canine to canine and both upper and lower arches with strong aesthetically pleasing results.

Black triangle Matrices

Using paired matrices, curvature (indicated by color) closes spaces up to:

Pink – 1 mm space
Yellow – 1.5 mm space
Green – 2 mm space
Blue – 2.5 mm space

1. Small Incisor BT Matrix Tub: For mandibular incisors and small maxillary lateral incisors
2. Large Incisor BT Matrix Tub: Are taller and wrap the tooth more than the Small Incisor BT Matrices. They should be used for maxillary central Incisors, large maxillary lateral incisors, maxillary and mandibular canines, and maxillary and mandibular bicuspids.

Black Triangle Gauge

The BT Gauge is for use with the new color-coded BT Matrices. The use of the gauge with these color-coded matrices is designed to make black triangle closures simpler and more efficient.

TruContact Saws and Sanders

Contact optimization is an essential part of the Bioclear Method. Natural contacts are generally too tight and too rough to allow insertion of a mylar matrix. Bioclear TruContact Saws and Sanders are designed to work in sequence to lighten the contact which then improves the ease of placement of the mylar matrices. As an additional advantage, the TruContact also removes biofilm from the contact

Dual Color Disclosing Solution

Disclosing solution for discovery of cracks and biofilm for blasting. Newer Biofilm stains pink. Older biofilm & cracks (more than 24 hours) stain purple, aiding the clinician in properly educating patients about oral hygiene & restorative needs.

Cleaning & Sterilization

1. BT Gauges and TrueContact Saws and Sanders are reusable and autoclavable. Wash with soap and water using a soft brush to remove debris
   Note: Do NOT use sprays/wipes, this could damage the BT Gauge.
   2. Sterilize using steam sterilizers only on the regular cycle
   Note: Temperature of sterilizer should NOT exceed 270° F/132° C

Ionosit Baseliner for Gap-free restorations

Create gap-free restorations Ionosit Baseliner prevents micro-gaps, the leading cause of microleakage, before they happen. It’s a fact of life that composites undergo polymerization shrinkage.

We rely on adhesives to maintain a strong gap free bond between composite and dentin, but that doesn’t always happen.

Ionosit Baseliner employs patented controlled expansion technology to reduce the post-polymerization stress which leads to leakage, post-op sensitivity and recurrent decay.

Functionality

Ionosit Baseliner combines the optimum properties of glass ionomers and composites in one material. It expands by approximately 1% and counteracts the polymerization shrinkage stress of the shrunken composite. This efficiently prevents the formation of marginal gaps and associated bacterial penetration.

The dentinal tubules are sealed and the pulp is protected from bacterial influences, which is a reliable and permanent means of preventing pulp damage and postoperative sensitivity.

Ionosit Baseliner serves as a stress-breaker for the entire cavity as it counteracts the polymerization shrinkage of the restoration. Structural stress or microfractures in the composite are minimized.

This guarantees durable, functionally reliable restorations.

Protection

Ionosit Baseliner is applied in a layer of 1mm thickness between dentin and composite.

It releases fluoride and zinc ions to provide protection at the junction between the tooth surface and the restoration, a particularly vulnerable area. The release of these substances forms a protective barrier for the tooth.

Ionosit Baseliner can be easily applied directly from the syringe.

Dentin interaction 

Ionosit Baseliner is capable of controlled expansion. Thanks to its innovative chemistry, it also forms a connection to dentin, creating a reaction zone. The crucial advantage: possible gaps created by polymerization shrinkage of the composite material are negated and stress on the dentin interface is reduced.

Feature & Benefits

e-Temp -  Hydraulic Temporary Restorative Material

e-Temp is a temporary filling material for standard cavities and post-endodontic treatments.

• Adheres to dentin,
• Expands slightly during setting 
• Hardens rapidly to ensure hermetical seal
• Improved mechanical properties for quick temporary filling
• Moisture-activated: sets within 25 minutes or less
• Contains zinc oxide and calcium sulfate
• Excellent adaptability
• Easy to remove

Benefits

• Temporary Filling Material for Standard Cavities.
• Easily setting initiated by saliva. - Excellent adaptability.
• Easy to remove.
• Adheres to dentine, expands slightly during the setting and hardens rapidly to ensure hermetical seal.
• Improved the mechanical properties for the quick temporary filling.
• Directions
• Prepare and dry the cavity with a small cotton pellet.
• Transfer e-Temp to the cavity using a suitable instrument and form the contour. In the case of occlusal Class I, the patient bites down on the surface, and then form the contour.
• After the patient close the mouth, e-Temp will harden within 25 minutes. Recommend the patient to avoid the strong pressure or abrasion for at least 2 hours.