Buy Dental Product Collection Online at Great Price | Log on to DentalAvenueIndia

SDI Radii Plus - High powered cordless LED curing light

SDI

SDI Radii Plus - High powered cordless LED curing light

(0)

Rs. 53,300 Rs. 58,700

Radii Plus - High powered cordless LED curing light

Not just a powerful LED curing light

Curing? Whitening? Transilluminating? The Radii Plus does it all. The amazing transformation takes place with a simple pull and click of the LED attachment. It’s unique, easy to upgrade design, provides unlimited potential making it the best investment you will ever make

Ramp mode (soft start)

You have a choice. The Radii Plus is initially set up without a ramp. When the ramp mode is selected, the Radii Plus’ light output power gradually increases during the first 5 seconds. This minimises polymerisation stress in the restoration. To switch between modes, hold down the on/off button until audio beeps are heard. A blue light comes on when the ramp mode is activated.

Pulse technology

Using a combination of pulse technology and steady current, the Radii Plus can achieve a higher light output without generating excess heat.

5 Years warranty

The Radii Plus’ robust and reliable construction assures your investment is long lasting. The standard Radii Plus unit has a 5 year warranty. The battery section has a 2 year warranty.

Depth of cure

Radii Plus’ up to 6mm depth of cure enables more complete curing of the restoration. This ensures interfacial adaptation and longevity of the restoration.

Efficient energy user

The light emitted by the Radii Plus corresponds to the maximum absorbance of camphorquinone ensuring efficient curing of most light cured dental materials.

Simple to replace parts

Designed with snap-in or screw in connections, each part of the Radii Plus including the battery is easy to remove and replace.

Cordless

The Radii Plus is a cordless unit allowing complete freedom of movement and total control.

No noisy fan

Unlike other LED lights, the Radii Plus does not require a fan. It uses heat sink technology to reduce the amount of heat emission.

High intensity – 1,500mW/cm²

The higher the intensity, the more the light penetrates to efficiently cure the restorative

Infection control

Perfectly fitted disposable barrier sleeves prevent cross contamination.

Recharging

The Radii Plus does not need to be constantly recharged. Its can be used for 1200 ten second cures with just one charge.

Built in radiometer

The Radii Plus’ built-in radiometer provides a simple test to ensure the functionality of the light.

Slimline design

The small tip and slimline design of the Radii Plus allows users to have easy access to the posterior area. This is particularly beneficial when treating children.

Rotatable head

The head of the Radii Plus can be easily turned 360º to what ever position required. Upper quadrants are simple to access.

Lightweight – 177g/6.2oz

The standard Radii Plus’ ergonomic and lightweight design minimizes user fatigue and maximizes comfort.

Out of stock

Bioclear Black Triangle kit - Matrix System for Anterior Black Triangles

Bioclear

Bioclear Black Triangle kit - Matrix System for Anterior Black Triangles

(0)

Rs. 39,995 Rs. 48,650

Black Triangle (BT) Kit

Bioclear is pleased to introduce the Black Triangle System, a new matrix system that enables black triangle closure up to 40% faster* than with the original Bioclear matrices.

Black Triangle matrices are custom designed for black triangle treatment and require no trimming prior to seating.

A color-coded gauge and matrices makes choosing the correct curvature for gingival embrasure closure simple and predictable. Curvature is indicated by colors at the top of the matrix and correspond with a gauge that, when inserted into the black triangle, indicates which curvature to use.

The matrices come in two sizes (large incisor and small incisor) and four curvatures allowing you to treat the entire anterior sextant, canine to canine and both upper and lower arches with strong aesthetically pleasing results.

Black triangle Matrices

Using paired matrices, curvature (indicated by color) closes spaces up to:

Pink – 1 mm space
Yellow – 1.5 mm space
Green – 2 mm space
Blue – 2.5 mm space

Small Incisor BT Matrix Tub: For mandibular incisors and small maxillary lateral incisors
Large Incisor BT Matrix Tub: Are taller and wrap the tooth more than the Small Incisor BT Matrices. They should be used for maxillary central Incisors, large maxillary lateral incisors, maxillary and mandibular canines, and maxillary and mandibular bicuspids.

Black Triangle Gauge

The BT Gauge is for use with the new color-coded BT Matrices. The use of the gauge with these color-coded matrices is designed to make black triangle closures simpler and more efficient.

TruContact Saws and Sanders

Contact optimization is an essential part of the Bioclear Method. Natural contacts are generally too tight and too rough to allow insertion of a mylar matrix. Bioclear TruContact Saws and Sanders are designed to work in sequence to lighten the contact which then improves the ease of placement of the mylar matrices. As an additional advantage, the TruContact also removes biofilm from the contact

Dual Color Disclosing Solution

Disclosing solution for discovery of cracks and biofilm for blasting. Newer Biofilm stains pink. Older biofilm & cracks (more than 24 hours) stain purple, aiding the clinician in properly educating patients about oral hygiene & restorative needs.

Cleaning & Sterilization

BT Gauges and TrueContact Saws and Sanders are reusable and autoclavable. Wash with soap and water using a soft brush to remove debris
Note: Do NOT use sprays/wipes, this could damage the BT Gauge.
2. Sterilize using steam sterilizers only on the regular cycle
Note: Temperature of sterilizer should NOT exceed 270° F/132° C

Out of stock

SDI

SDI Ultramat S - High Speed Multi-Use Triturator

(0)

Rs. 36,800 Rs. 44,200

Low in stock

Bioclear Rockstar Polishing Kit -For Phenomenal Shine & Finish Of Composites

Bioclear

Bioclear Rockstar Polishing Kit -For Phenomenal Shine & Finish Of Composites

(0)

Rs. 27,945 Rs. 32,000

Out of stock

Bioclear TwinRing - For Class II Matrix Adaptation

Bioclear

Bioclear TwinRing - For Class II Matrix Adaptation

(0)

Rs. 23,720 Rs. 28,310

In stock

Bioclear Biofit HD Posterior Kit - Matrix System for Posterior Class II Restorations

Bioclear

Bioclear Biofit HD Posterior Kit - Matrix System for Posterior Class II Restorations

(0)

Rs. 19,610 Rs. 24,000

Biofit HD Posterior Kit-Matrix system for posterior Class II restorations

The Complete Biofit HD Posterior Kit contains the entire range of Biofit HD Matrices (appropriate for 75% of posterior molar cases) and also includes Diamond Wedges (which have strong separation yet require less effort to place than traditional wedges) and Twin Rings (comprised of strong, long-lived twin NiTi wires).

Biofit HD Series

The HD series Bioclear Biofit matrices introduce new matrix technology and designs that ensure ideal tooth contours and a heavier material that ensures easier placement

The HD series Bioclear Biofit matrices introduce new matrix technology and designs that ensure ideal tooth contours. Formed with translucent white 75µ mylar, the stiffer mylar and placement tab provides a rigid structure that makes the matrix easy to place.

The translucence of the mylar allows ample light to pass through for thorough light curing. Mylar matrices also leave the composite more polished and contoured than traditional metal matrices which leave a more matte finish.

In addition, the new shape of the Biofit matrices offers 30% more buccal/lingual and occlusal wrap than traditional matrices and will be appropriate for 75% of all posterior molar cases.

The new Biofit HD matrices come in four sizes; Molar 4.5 mm, 5.5 mm, 6.5 mm, and Pre-Molar 5.5 mm

Diamond Wedges and Long Diamond Wedges

The Bioclear Diamond Wedge is designed to solve many of the difficulties in using traditional, rigid wedges.

The Diamond Wedge requires less effort to place than traditional wedges due to the diamond shaped cut-out in the tip, which collapses during insertion. The wedge then springs open once through the embrasure, creating a tight seal and preventing the wedge from backing out.

While still maintaining strong tooth separation, the flexibility of the Diamond Wedge creates an excellent marginal adaptation which eliminates the uncontrolled flow of excess composite and minimizes clean up after the composite has been cured.

The Diamond Wedge is offered in both original and long. The Original Diamond Wedge is intended for most cases. The Long Diamond Wedge is approximately 2mm longer than the original wedge and is intended to be used when working on wider molars. Typically long wedges are used in conjunction with the Pink or Orange Evolve matrices

TwinRing

The TwinRing is designed for use in sectional Class II matrix adaptation and can be used with any matrix.

The unique design allows the TwinRing to adapt to a variety of tooth types and shapes. The geometry of the ring causes it to apply a strong, even tension that:

Assists in the separation of the teeth
Creates a strong seal with the matrix without collapsing the matrix into the cavity
Doesn’t allow the composite to flow past the gingival margin which eliminates line angle overhangs.

The structural design of the TwinRing causes it to have excellent form memory; it is guaranteed to retain its original shape without warping, even after hundreds of uses.

TwinRing Forceps

The Bioclear Twin Ring forceps are specially engineered for use with the Bioclear Twin Rings.

Clinical Tips

1. Used with a rubber dam

2. Choose the correct matrix – Use a Bioclear clear matrix for simultaneous buccal & lingual curing

3. Use Bioclear Forceps, as designed specifically for the Twin Ring

4. Check for proper matrix orientation

5. Seat deep into sulcus Use the MATRIX SELECTION GUIDE on the back of the instructions to help select the appropriate matrix.

6. Use Bioclear Forceps with the Twin Ring. The Bioclear Forceps are specifically designed for safely and securely opening and placing the Twin Ring.

7. Ensure that the tines of the forceps are completely engaged with the plastic handles of the Twin Ring (see below). If they are not fully engaged or if the tines are seated on the metal, then it can cause the Twin Ring to break.

In stock

DiaDent

Diadent D-Lux-Dual Wavelength Cordless LED Curing Light

(0)

Rs. 17,720 Rs. 21,260

Dual Wavelength Cordless LED Curing Light D-Lux is a new advanced cordless LED curing light. Made from the highest quality aluminum, D-Lux dissipates heat quickly to prevent overheating problem so that it can produce the maximum light intensity safely and consistently. With its lightweight and ergonomic design, D-Lux is easy to use and highly portable.
Its battery pack can easily be replaced. Without taking out the battery from the hand-piece completely, the power can be shut off by using the Power switch. With advanced built-in protection circuit modules (to protect over-charging and over- discharging), D-Lux is reliable and safe to use. OLED display panel conveniently indicates battery life and a countdown timer for the next needed charge.
With D-Lux's fast charging system, the battery can be fully charged in 90 minutes. D-Lux also has 5 versatile curing modes for every indication, such as turbo mode, soft start mode and pulse mode. Soft-start mode and pulse mode can reduce the rapid contraction when the composite resin material is being cured by the curing light

Features • High intensity output of 2,400 mW/cm2 and 10W LED
• 360° swivel light probe and silicone ring tip ensure patient comfort
• Broadband spectrum of 385nm~515nm
• Dual-wavelength with 4 LED lamps can efficiently polymerize all dental materials
• Wireless inductive charging system eliminates any potential charging contact problems
• High capacity 2,600 mAh Li-ion battery offers longer battery life and power intensity stability
• Designed ergonomically, the handpiece is light and elegant so it can easily reach all curing sites offering maximum comfort for both patient and clinician
• Designed for comfort, the light probe has an optimal 10 angle to reach all tooth surface even posterior area
• Built-in Light Intensity Measurement Sensor provides peace of mind so clinicians can always verify if the intensity is within normal range
• 5 versatile curing modes allow flexible curing time and power intensity including 1-second curing and Orthodontic curing mode

5 CURING MODES:

5 Max: Maximum light intensity output for 5 seconds
10 Max: Maximum light intensity output for 10 seconds
20 Mid: 70% output of maximum light intensity for 20 seconds
20 Soft: An initial 10% output of maximum light intensity that gradually increases to full power in 10 seconds, followed by 10 seconds output at full power.
20 Pulse: Pulses every 0.15 seconds for 20 seconds at a maximum light intensity

Out of stock

Bioclear Black Triangle Procedural Kit - Matrix System for Anterior Black Triangles

Bioclear

Bioclear Black Triangle Procedural Kit - Matrix System for Anterior Black Triangles

(0)

Rs. 14,775 Rs. 17,000

Black Triangle (BT) Procedural Kit

Bioclear is pleased to introduce the Black Triangle System, a new matrix system that enables black triangle closure up to 40% faster* than with the original Bioclear matrices.

Black Triangle matrices are custom-designed for black triangle treatment and require no trimming before seating.

A colour-coded gauge and matrices make choosing the correct curvature for gingival embrasure closure simple and predictable. Curvature is indicated by colours at the top of the matrix and corresponds with a gauge that, when inserted into the black triangle, indicates which curvature to use.

The matrices come in two sizes (large incisor and small incisor) and four curvatures allowing you to treat the entire anterior sextant, canine to canine and both upper and lower arches with strong aesthetically pleasing results.

Black triangle Matrices

Using paired matrices, curvature (indicated by colour) closes spaces up to:

Pink – 1 mm space
Yellow – 1.5 mm space
Green – 2 mm space
Blue – 2.5 mm space

1. Small Incisor BT Matrix Tub: For mandibular incisors and small maxillary lateral incisors

2. Large Incisor BT Matrix Tub: These are taller and wrap the tooth more than the Small Incisor BT Matrices. They should be used for maxillary central Incisors, large maxillary lateral incisors, maxillary and mandibular canines, and maxillary and mandibular bicuspids.

Black Triangle Gauge

The BT Gauge is for use with the new colour-coded BT Matrices. The use of the gauge with these colour-coded matrices is designed to make black triangle closures simpler and more efficient.

Cleaning & Sterilization

1. BT Gauges and TrueContact Saws and Sanders are reusable and autoclavable. Wash with soap and water using a soft brush to remove debris
Note: Do NOT use sprays/wipes, this could damage the BT Gauge.

2. Sterilize using steam sterilizers only on the regular cycle
Note: The temperature of the sterilizer should NOT exceed 270° F/132° C

Out of stock

SDI Riva Silver - Silver Reinforced Glass Ionomer Cement

SDI

SDI Riva Silver - Silver Reinforced Glass Ionomer Cement

(0)

Rs. 13,200 Rs. 15,000

Riva Silver - Mercury free, fluoride releasing, silver restorative Material

When you need a tough and strong core build up material or occlusal restoration, Riva Silver is your answer. Riva Silver is an excellent core build up material and at the same time, it is a great restorative. Riva Silver is the ideal restorative in situations where patient compliance and moisture control are difficult. Riva Silver is extremely easy and quick to use. When all else fails, Riva Silver could be your solution.

Proprietary ionglass^TM technology

Riva Silver utilises SDI’s proprietary ionglass™ filler developed by our glass technologists. ionglass™ is a radiopaque, high ion releasing, reactive glass used in SDI’s range of dental cements. Riva Silver releases substantially higher fluoride to assist with remineralisation of the natural dentition.

Light colour

The light grey colour of Riva Silver requires minimal masking when used under aesthetic restorations.

Easy handling

Riva Silver’s condensable nature allows the operator to quickly and easily place the restoration. Riva Silver can be packed using an amalgam condenser.

Perfect for non-compliant patients

Riva Silver is the ideal restorative in situations where patient compliance and moisture control are difficult. Riva Silver is extremely easy and quick to use.

Great for core buildups

Riva Silver is an excellent material for core buildups. Its high early compressive and bond strength properties ensure favourable core buildup conditions

High early strength

Riva Silver’s high compressive strength minimises the risk of fracture in the critical early stages after the restoration has been placed.

High radiopacity

The addition of metal particles into the cement substantially increases radiopacity. Riva Silver is easily differentiated on radiographs from that of tooth structure allowing easy diagnosis of early lesions.

High fluoride release

Riva Silver’s free movement of fluoride provides benefits to surrounding and adjacent tooth surfaces. Fluoride is held within the glass matrix without being bound by the structure. If the level outside the matrix is lower, then fluoride ions are released.

Conversely, if the fluoride level is higher (eg. from topical fluoride) then fluoride will recharge the glass ionomer matrix. Riva Silver has the ability to be recharged with fluoride from external sources, providing long-term protection against recurrent caries. Riva Silver is great for treating high caries-risk patients as part of an overall treatment plan for maximum care.

No additional mixing step

The benefits of using Riva Silver capsules are obvious. However, if using the powder / liquid system, no separate adding and mixing of alloy into the powder is required. The alloy component of Riva Silver is pre-mixed into the powder bottle.

In stock

Bioclear Anterior Kit - Modern Matrix System for Esthetic Restorations

BioClear

Bioclear Anterior Kit - Modern Matrix System for Esthetic Restorations

(0)

Rs. 12,940 Rs. 16,130

In stock

SS White Carbide Trimming & Finishing Burs - Straight Shaped

SS White

SS White Carbide Trimming & Finishing Burs - Straight Shaped

(0)

Rs. 11,780 Rs. 13,000

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

Out of stock

DMG Luxacrown - Semi-Permanent Chair Side Composite Crown

DMG

DMG Luxacrown - Semi-Permanent Chair Side Composite Crown

(0)

Rs. 11,500 Rs. 13,500

Out of stock

Bioclear Biofit HD Posterior Mini Kit - Matrix System for Posterior Class II Restorations

Bioclear

Bioclear Biofit HD Posterior Mini Kit - Matrix System for Posterior Class II Restorations

(0)

Rs. 10,900 Rs. 12,750

Biofit HD Posterior Mini Kit-Matrix system for posterior Class II restorations

The Biofit HD Posterior Mini Kit contains a range of Biofit HD Matrices Molar 4.5mm, 5.5mm and 6.5mm (appropriate for 75% of posterior molar cases) pre molar 5.5mm and also includes Diamond Wedges (which have strong separation yet require less effort to place than traditional wedges)

Biofit HD Series

The HD series Bioclear Biofit matrices introduce new matrix technology and designs that ensure ideal tooth contours and a heavier material that ensures easier placement

The HD series Bioclear Biofit matrices introduce new matrix technology and designs that ensure ideal tooth contours. Formed with translucent white 75µ mylar, the stiffer mylar and placement tab provide a rigid structure that makes the matrix easy to place.

The translucence of the mylar allows ample light to pass through for thorough light curing. Mylar matrices also leave the composite more polished and contoured than traditional metal matrices which leave a more matte finish.

In addition, the new shape of the Biofit matrices offers 30% more buccal/lingual and occlusal wrap than traditional matrices and will be appropriate for 75% of all posterior molar cases.

The new Biofit HD matrices come in four sizes; Molar 4.5 mm, 5.5 mm, 6.5 mm, and Pre-Molar 5.5 mm

Diamond Wedges and Long Diamond Wedges

The Bioclear Diamond Wedge is designed to solve many of the difficulties in using traditional, rigid wedges.

The Diamond Wedge requires less effort to place than traditional wedges due to the diamond-shaped cut-out in the tip, which collapses during insertion. The wedge then springs open once through the embrasure, creating a tight seal and preventing the wedge from backing out.

While still maintaining strong tooth separation, the flexibility of the Diamond Wedge creates an excellent marginal adaptation that eliminates the uncontrolled flow of excess composite and minimizes clean-up after the composite has been cured.

The Diamond Wedge is offered in both original and long. The Original Diamond Wedge is intended for most cases. The Long Diamond Wedge is approximately 2mm longer than the original wedge and is intended to be used when working on wider molars. Typically long wedges are used in conjunction with the Pink or Orange Evolve matrices

Clinical Tips

1. Used with a rubber dam

2. Choose the correct matrix – Use a Bioclear clear matrix for simultaneous buccal & lingual curing

3. Use Bioclear Forceps, as designed specifically for the Twin Ring

4. Check for proper matrix orientation

5. Seat deep into sulcus Use the MATRIX SELECTION GUIDE on the back of the instructions to help select the appropriate matrix.

6. Use Bioclear Forceps with the Twin Ring. The Bioclear Forceps are specifically designed for safely and securely opening and placing the Twin Ring.

7. Ensure that the tines of the forceps are completely engaged with the plastic handles of the Twin Ring (see below). If they are not fully engaged or if the tines are seated on the metal, then it can cause the Twin Ring to break.

In stock

Buy Online SDI Permiter refill At BestPrice

SDI

SDI Permite - High Strength, Easy Carving Admix Amalgam

(0)

Rs. 10,725 Rs. 12,325

In stock

Bioclear Black Triangle Matrices - Refill Packs-Matrices for Anterior Esthetic Restorations

Bioclear

Bioclear Black Triangle Matrices - Refill Packs-Matrices for Anterior Esthetic Restorations

(0)

Rs. 10,495 Rs. 13,390

Black Triangle (BT) Kit

Bioclear is pleased to introduce the Black Triangle System, a new matrix system that enables black triangle closure up to 40% faster* than with the original Bioclear matrices.

Black Triangle matrices are custom designed for black triangle treatment and require no trimming prior to seating.

A color-coded gauge and matrices makes choosing the correct curvature for gingival embrasure closure simple and predictable. Curvature is indicated by colors at the top of the matrix and correspond with a gauge that, when inserted into the black triangle, indicates which curvature to use.

The matrices come in two sizes (large incisor and small incisor) and four curvatures allowing you to treat the entire anterior sextant, canine to canine and both upper and lower arches with strong aesthetically pleasing results.

Black triangle Matrices

Using paired matrices, curvature (indicated by color) closes spaces up to:

Pink – 1 mm space
Yellow – 1.5 mm space
Green – 2 mm space
Blue – 2.5 mm space

Small Incisor BT Matrix Tub: For mandibular incisors and small maxillary lateral incisors
Large Incisor BT Matrix Tub: Are taller and wrap the tooth more than the Small Incisor BT Matrices. They should be used for maxillary central Incisors, large maxillary lateral incisors, maxillary and mandibular canines, and maxillary and mandibular bicuspids.

Black Triangle Gauge

The BT Gauge is for use with the new color-coded BT Matrices. The use of the gauge with these color-coded matrices is designed to make black triangle closures simpler and more efficient.

TruContact Saws and Sanders

Contact optimization is an essential part of the Bioclear Method. Natural contacts are generally too tight and too rough to allow insertion of a mylar matrix. Bioclear TruContact Saws and Sanders are designed to work in sequence to lighten the contact which then improves the ease of placement of the mylar matrices. As an additional advantage, the TruContact also removes biofilm from the contact

Dual Color Disclosing Solution

Disclosing solution for discovery of cracks and biofilm for blasting. Newer Biofilm stains pink. Older biofilm & cracks (more than 24 hours) stain purple, aiding the clinician in properly educating patients about oral hygiene & restorative needs.

Cleaning & Sterilization

BT Gauges and TrueContact Saws and Sanders are reusable and autoclavable. Wash with soap and water using a soft brush to remove debris
Note: Do NOT use sprays/wipes, this could damage the BT Gauge.
2. Sterilize using steam sterilizers only on the regular cycle
Note: Temperature of sterilizer should NOT exceed 270° F/132° C

In stock

SS White Carbide Trimming & Finishing Burs - Safe end Series Shaped

SS White

SS White Carbide Trimming & Finishing Burs - Safe end Series Shaped

(0)

From Rs. 8,085 Rs. 9,250

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

In stock

SS White Carbide Trimming & Finishing Burs - Surgical Lenght Finishing Shaped

SS White

SS White Carbide Trimming & Finishing Burs - Surgical Length Finishing Shaped

(0)

Rs. 7,740 Rs. 8,500

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

Out of stock

SS White Carbide Trimming & Finishing Burs - CFT Shaped

SS White

SS White Carbide Trimming & Finishing Burs - CFT Shaped

(0)

Rs. 7,740 Rs. 8,500

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

In stock

SS White Carbide Trimming & Finishing Burs - Flat and Taper Shaped

SS White

SS White Carbide Trimming & Finishing Burs - Flat and Taper Shaped

(0)

Rs. 7,740 Rs. 8,500

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

In stock

SS White Carbide Trimming & Finishing Burs - Taper Shaped

SS White

SS White Carbide Trimming & Finishing Burs - Taper Shaped

(0)

Rs. 7,740 Rs. 8,500

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

In stock

SS White Carbide Trimming & Finishing Burs - Round and Taper Shaped

SS White

SS White Carbide Trimming & Finishing Burs - Round and Taper Shaped

(0)

From Rs. 7,740 Rs. 8,500

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

In stock

SS White Carbide Trimming & Finishing Burs - Inverted Taper Shaped

SS White

SS White Carbide Trimming & Finishing Burs - Inverted Taper Shaped

(0)

Rs. 7,740 Rs. 8,500

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

In stock

SS White Carbide Trimming & Finishing Burs FLAME SHAPED

SS White

SS White Carbide Trimming & Finishing Burs - Flame Shaped

(0)

Rs. 7,740 Rs. 8,500

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

In stock

SS White

SS White Carbide Trimming & Finishing Burs - FOA 1 Shaped

(0)

Rs. 7,740 Rs. 8,500

SS White Carbide - Trimming & Finishing Burs:
Powerful Cutting Performance for Faster, More Beautiful Finishes and Polishes

10 blade Safe End or 12 blade finishing burs efficiently trim and contour composites

20 blade Safe End or 20 blade Finishing burs create an ultra-smooth, pre-polish on composites

MAXIMUM STRENGTH & DURABILITY
Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength and durability of an SS White bur. A study conducted at the University of Maryland confirms that SS White 557 burs are 84.67% stronger than Midwest Standard 557 Burs.*

Carefully designed blade structure, rake angle, flute depth and spiral angulation combined with our specially formulated tungsten carbide results in the powerful cutting performance of SS White burs. SS White burs are engineered to deliver the most efficient cutting rate & performance for the most popular procedures.

SS White solid carbide burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.

For shank construction, SS White uses surgical grade stainless steel, which resists corrosion during sterilization processes used in the dental office.

Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.

SS White Burs delivers minimal vibration when subjected to the rotational speeds of the dental hand-piece and maximizes performance and procedural comfort for you and your patient. SS White burs are engineered to deliver the most efficient cutting rate and performance for the most popular procedures.

Consistent Quality

SS White® is ISO 13485, EN46001 and CE Mark Certified which means an SS White® bur is manufactured to the highest quality standards. SS White® reflects the importance of manufacturing to the highest standard of quality in its Quality Policy which states:

Total commitment to ISO 13485, MDD 93/42 EEC –Annex II and Total Quality Manufacturing Provide customers with the highest valued products and services pursue continuous improvement Focus on customer needs.
You can depend on the consistent quality of a SS White® bur… in all ways, always.

Out of stock

Drawer menu

All Collections

Drawer menu

All Collections

Related collections